Double flanged butterfly valve manufacturer in India

 Specialityvalve is the greatest Double flanged butterfly valve manufacturer in India.

Double flanged Butterfly Valve belongs to quarter-turn rotational motion and is used primarily to prevent, regulate or start the flow.

Butterfly valves are particularly appropriate for the treatment of enormous progressions of fluids or gases at relatively low pressing factors and the treatment of slurries or fluids with huge sums of suspended solids.

Butterfly valves are based on the guideline of a line damper. The stream control component is a circle of around a similar breadth as within the width of the bordering pipe, which pivots on either a vertical or flat hub. At the point when the circle lies corresponding to the funneling run, the valve is completely opened. At the point when the circle moves toward the opposite position, the valve is closed. Middle-of-the-road positions, for choking purposes, can be gotten set up by handle-locking gadgets.

Below are some of the standards of Double flanged butterfly valve

  • DIN
  • JIS
  • BS
  • ANSI
  • ASME
  • API

Below are some of the mediums of Double Flanged butterfly valve:

Water, gas, air, cryogenics.

Advantages of Double flanged butterfly valve:

  • They are small and that they open and shut very quickly.
  • They are very precise, which makes them precedence in industrial application.
  • They are reliable and need little and no maintenance

Double flanged butterfly valve is used in many industries like

  • Chemical Industry
  • Petroleum Industry
  • Mining Industry
  • Food Industry

Materials: Ductile Iron, Cast Iron, Duplex Steel,316L, CF8M, CF8, CF3M, WCB, SS316, SS304.

Class: 150 to 300

Nominal Pressure: PN 6 – PN 25

Ends: Flanged

Size: 2 ‘’ to 60 ‘’

Operation: Electric actuated, Pneumatic actuated, Gear operated, lever operated.

Showing the single result

  • 3,136.00

    Double Flanged Butterfly Valve

    Double Flanged Butterfly Valve Body: Wcb, Ductile Iron, CF8, CF8M, CF3M Disc: WCB, Ductile Iron, CF8, CF8M Stem: SS420, SS431 Bolt: SS304 Screw: SS304 Retainer: SS201 Seal: NBR Bearing: RPTFE+Graphite Nominal Diameter: DN50 to DN350 Nominal Pressure: PN10 to PN16, Class150 to Class2500 End Connections: Flanged Operation: Gear Operated, Electric Actuated, pneumatic Actuated Design and […]