Angle Globe Valve Manufacturer in India
Specialityvalve is the topmost Angle Globe Valve Manufacturer in India. It is a customized globe valve with inlet and outlet at right angles. The basic structure of this valve is the same as that of a globe valve, however they differ mainly in the direction of fluid flow since the fluid in the valve performs a 90° rotation. These valves are installed in lines with complicated pipe structure or pressure drops. They come with pressure-seal or bolted bonnets, depending on the line pressure.
An angle pattern globe valve’s body design is identified by the primary regular pattern globe valve. The opening and closing sections of an angle globe valve are plug-shaped valve discs, the sealing surface is flat or conical, and the flap travels linearly down the fluid’s center. This Globe valve’s ends are at a 90-degree angle, and fluid flow happens with a single 90-degree rotation. Their flow rate is much lower than that of oblique-style globe valves. They are commonly used in applications that include cycles of moving flow because of their capacity to withstand the crushing effect of this type of flow.
Advantages
- Precise Flow Control
- Tight Shut off
- Ability to change the direction of fluid flow by 90 degrees
- Compact Design
- They can handle a wide range of fluids.
- Reduced Pressure Drops
Industry
- Petrochemical and Chemical Industries
- Oil and Gas Production and Refining
- Power Generation (including fossil fuel and nuclear power plants)
- Water and Wastewater Treatment
- Pulp and Paper Manufacturing
- Marine and Shipbuilding
- Mining and Mineral Processing
- Aerospace and Defense
- Automotive Manufacturing
- Steel and Metal Processing
- Renewable Energy (e.g., solar and geothermal power plants)
Description:
- Available materials: Monel, Incoloy, Inconel, F55, F53, F51, Cast iron, SS304, SS316, Titanium, Zirconium, WCB, CF8, CF8M, CF3, CF3M, WC1, WC6, WC9
- Size: 1/2″ to 24″
- Class: 150 to 2500
- Nominal Pressure: PN10 to PN450
- Operation: Handwheel
- Ends: Flanged, Buttweld, Socketweld, Threaded
- Standards: ASME, API6D, API607, DIN, BS, ANSI
-
Angle Globe Valve
Angle Globe Valve 1. Body: Cast Iron, Carbon Steel 2. Disc: A105+13Cr 3. Cover: A105 4. Stem: 2Cr13, F6a 5. Gasket: SS304+ Graphite 6. Bolt: A193B7 7. Nut: A194 2H 8. Bonnet: Cast Iron, Carbon Steel 9. Pin: Carbon Steel 10. Packing: Graphite 11. Gland: Cast Iron, Carbon Steel 12. Eye Bolt: A193 B7 13. […]