Dual Plate Check Valve

Reliable non-return operation is supported by Dual Plate Check Valve Manufacturer in India for industrial pipelines.

Dual Plate Check Valve Manufacturer in India

The dual-plate arrangement is suited to automatic non-return service where rapid closure, compact dimensions and controlled plate movement are important. Two independently moving plates are supported on a central hinge arrangement and assisted by springs. Speciality Valve manufactures dual plate check valve configurations with body, plate, spring and seat materials selected for applications involving water, hydrocarbons, chemicals, power-plant utilities and marine service.

Dual Plate Closure Performance:

Spring-assisted closure: Springs begin returning the plates toward the seats as forward flow decreases.
Short travel: Limited plate movement supports rapid closure.
Reverse-flow control: Early seating can limit reverse-flow development.
Pressure surge reduction: Correctly engineered closure characteristics can reduce transient effects.
Independent plates: Each plate responds to local differential pressure.
Automatic operation: No external actuator is required during normal operation.
Seat loading: Depends on differential pressure, spring characteristics and seating geometry.
Flow resistance: Open-area geometry influences head loss and velocity distribution.

Dual Plate Check Valve Material Grades:

Component	Representative Materials / Grades
Carbon steel body	ASTM A216 WCB/WCC
Low-temperature body	ASTM A352 LCB/LCC
Stainless body	ASTM A351 CF8/CF8M
Duplex body	ASTM A890 Grade 4A
Stainless plate	ASTM A351 CF8M or suitable equivalent
Duplex plate	ASTM A890 duplex grades
Spring	Stainless steel or nickel alloy
Hinge pin	Stainless, duplex or specified alloy

General Technical Data:

Parameter	Configuration
Valve type	Dual plate check valve
Closure	Two spring-assisted plates
Operation	Automatic
Body	Wafer, lug or flanged depending on design
Seat	Soft or metallic
Size	Project/configuration dependent
Pressure class	Project/configuration dependent
Installation	Horizontal or approved vertical orientation
Testing	API 598

Materials for Different Process Conditions:

Material Family	Typical Consideration
Carbon steel	General industrial fluids
Stainless steel	Corrosive process media
Duplex stainless steel	Chloride-containing water and process service
Super duplex	More demanding chloride environments
Aluminium bronze	Marine and seawater systems
Nickel alloys	Selected severe chemical conditions

Material selection must account for temperature, concentration, pressure and contaminants rather than corrosion resistance alone.

Dual Plate Check Valve Service Applications:

Pump Discharge Lines: Limits reverse flow toward pumps during shutdown and changeover.
Compressor Discharge Piping: Provides automatic non-return protection for connected compression equipment.
Cooling-Water Circuits: Maintains intended flow direction in circulating-water systems.
Hydrocarbon Process Lines: Used for compatible hydrocarbon transfer and process services.
Water and Desalination Systems: Provides backflow protection in pumping, treatment and compatible seawater lines.

Size, Pressure and End Configuration:

Parameter	Details
Body patterns	Wafer, lug, flanged
Nominal size	Configuration dependent
Pressure class	Configuration dependent
PN rating	Configuration dependent
Face-to-face	API 594 / applicable dimensional standard
Flange interface	Applicable piping flange standard
Flow direction	Forward-flow dependent

Codes and Verification:

API 594: Covers applicable flanged, lug, wafer and butt-welding check valve designs.
ASME B16.34: Pressure-temperature ratings, materials, testing and marking.
ASME B16.10: Applicable face-to-face dimensions.
API 598: Inspection and pressure testing.
ISO 5208: Leakage testing where specified.

For pump, pipeline or process applications, provide the flow rate, line size, pressure differential and operating temperature to Speciality Valve to discuss the required plate, spring and seating characteristics and obtain a quotation.